Learning The Secrets About Businesses
on 04/05/2018

Things to Know about Kitchen Plumbing

One of the most sought after service of all time would be the plumbing service. From the case of laying out the piping, to the installation of hot water systems in a building, plumbers can choose to specialize on various fields. Some tasks that are being carried out by plumbers would be clean water supply systems, gas systems, drainage systems and kitchen plumbing systems. There are different aspects in kitchen plumbing systems that needs to be there in order for the kitchen to function efficiently.

Our kitchen is actually being fitted with pipes that will supply clean water and there are also other pipes that gets rid of the waste water. There also are other pipes of which supplies gas to the kitchen and gas valves are mostly being installed on the floor or on the wall. The cold and hot water valves are placed most often under sinks. From the valves that provides supply, the supply tubes will then be connected to the faucet.

The saddle valves could be attached to cold water valves for it to provide added water connections that will supply water to your water filter. The added connections could be made from plastic tubes or copper. The gas valves are mostly found under appliances which uses gas and you also could shut this off when the gas is not being used for the purpose of safety.

Pipes that are placed under the kitchen sink are usually curved and are also known as P-traps. Compression fittings are going to connect the curved pipes to the drainage pipe of the sink and you can in fact sometimes unscrew the fittings without the aid of any tool. In case you are planning to replace kitchen sink pipes, the plumber should carefully take the measurements of the pipes so that new pipes can be cut just right.

The water valves also are going to be turned off in order to cut off the supply of water when a repair work is still ongoing. P-trap connections also are unscrewed from the tailpieces of the sink through hand or through the use of pliers. The traps also are removed from the connections and the drain tailpieces also are going to be removed. The new tailpieces are screwed in and then new pipes are cut and fixed into place with the compression fittings through hand.

To keep your kitchen plumbing working well, there are several things that you could actually do. One of such things would be where you have to make certain that you don’t pour grease or perhaps fatty substances down into your kitchen sink. You need to also avoid throwing leftover foods which are hard to grind and just throw them in the garbage disposal.